How to: activate the cruise control on the Mazda 3 BL 1.6L AT 2012Y.

Mazda VCM-II IDS will be used as always. 

Make good connection. Moving to Module Programming :

mazda-3-activate-cruise-control-ids-1

Then select Programmable Parameters and then select Speed Items from drop-down list :

mazda-3-activate-cruise-control-ids-2

Here we have one parameter Cruise Control - (PCM) =? Change its value to Enabled :

mazda-3-activate-cruise-control-ids-3

Click on the check mark in the lower right corner, and on the pop-up IDS instructions, turn on / off the ignition the necessary number of times. 

Connect in automatic mode:

mazda-3-activate-cruise-control-ids-4

Select the Programming Module :

mazda-3-activate-cruise-control-ids-5

Select the VIN number corresponding to the car:

mazda-3-activate-cruise-control-ids-6

Click on Programmable Parameters -> Speed Positions :

mazda-3-activate-cruise-control-ids-7

Check the correctness of the VIN number:

mazda-3-activate-cruise-control-ids-8

Select Cruise Control - (PCM) = Enabled :

mazda-3-activate-cruise-control-ids-9

Turn on / off the ignition the necessary number of times, the system will prompt everything itself. Module configuration is complete:

mazda-3-activate-cruise-control-ids-10

Cruise works.
All good. 

Disclaimer: The tutorial was translated from Russian. You are at your risk. 

www.obdii365.com

http://blog.obdii365.com/2018/11/08/activate-mazda-3-2012-cruise-control-with-vcm2-ids/